LF201 Electro Cell Fusion Generator

Electro Cell Fusion Generator

  • Fusion of Mammalian Cells
    • hybridoma production for monoclonal antibodies, immuno-therapy, etc.
  • Fusion of Somatic Cell and Egg Cell or Embryonic Cell and Egg Cell
    • somatic cell nuclear transfer (SCNT) for animal cloning
  • Fusino of 2-Cell Blastomeres
    • tetraploid embryos
  • Fusion of Plant Cells/Yeasts
  • Oocyte Activation

        ※LF201 has already been discontinued. 
          
Please check the ECFG21 electro cell fusion generator,
      our latest and most advanced electroporator. 

LF201 Electro Cell Fusion Generator

PRODUCT DESCRIPTION

LF201 Features

Electric Impedance Measurement
The LF201 easily enables you to measure electric impedance between electrodes.
It makes it possible to find an abnormality before electrofusion start. This greatly enhances reproducibility.

Accurate Square Wave Pulses
The LF201 is designed to output precise square wave pulses.
The accurate square wave pulses bring high efficiency and renproducibility.
Especially an accurate voltage output by 1V resolution setting is important for successful SCNT experiments.

Short AC/DC Switching Time
Switching time from alternate current (AC) ouput to direct current (DC) pulse output is less than 5 microseconds.
The AC is for dielectrophoretic alignment of cells (Pearl Chain).
After the cell alignment, DC square pulses are output for fusion.
Then AC is re-applied for keeping cells together for the rounding off process.
The shorter AC/DC switching time leads to an effective fusion.

A Variety of CUY Series ElectrodesThe LF201 can be used with a variety of electrodes which make it possible to do a wide range of cell fusion experiments.
And custom-made electrodes are easily ordered and available for this LF201 Electro Cell Fusion Instrument. It enables you to realize the experiments which you have actually desired.

Two Kinds of DC Pulses
The LF201 offers two DC pulse modes. A positive (+) square wave only or a bipolar (+/-) square wave.

Two Kinds of  Post Fusions
The LF201  offers two kinds of post fusion It is able to choose a sine wave or fade wave.  

 

LF201 Specifications

  • AC Pulse
Wave Shape Sine Wave
Voltage 0~75V  (Peak to Peak/1V resolution)
Frequency  1MHz
Duration 0-100s (1sec resolution)
Post Fusion AC 0-10sec (Sine or Fade Wave)
Shunt Resistor Greater than 50 ohm
 
  • DC pulse
Wave Shape Positive (+) Square Wave Pulse
or Bipolar (+/-) Square Wave Pulse
Voltage 0-1,200V (1V resolution)
Pulse Length 0-100μs (1μsec resolution)
Pulse Interval 0.1-10s (0.1 sec resolution)
Number of Pulses 0-100 (Automatic/Manual)

 

  • Others
Resistance Measurement Up to 30.00Kohm
AC/DC
Switching Time
Less than 5μs
Memory 99 protcols
System
Requirement
Windows 2000, Windows XP
Power 100~240V, 50/60Hz
Dimensions, Weight 375W×360D×170H mm , 9kg
 

All features and specifications subject to change without notice.

RELATED PRODUCTS

Note: The specifications and appearance of products on this page are subject to change without notice.

Please feel free to contact us

Contact from here