Glass micropipettes/Silicone Tubing/Holders
![](http://nepagene.jp/wp-content/uploads/mpp-micropipette-e.png)
MPP Accessories
- Glass micropipettes
- Silicone Tubing
- PCR 8-tube strip holder
- PCR 8-cap strip holder
PRODUCT DESCRIPTION
Glass micropipettes
The glass micropipette is connected to the PicoPipet pipette part through the silicone tube.
Straight shape for dishes/microscope slides
![](http://nepagene.jp/wp-content/uploads/mpp-glass_micropipette_straight-e.jpg)
1-GS15-10: 10 pcs glass micropipettes, straight shape, tip ID 15 um
1-GT30-10: 10 pcs glass micropipettes, straight shape, tip ID 30 um
1-GT50-10: 10 pcs glass micropipettes, straight shape, tip ID 50 um
1-GT75-10: 10 pcs glass micropipettes, straight shape, tip ID 75 um
S shape for multiple-well plates/PCR tubes
![](http://nepagene.jp/wp-content/uploads/mpp-glass_micropipette_s-shape-e.jpg)
1-GT30S-6: 6 pcs glass micropipettes, S shape, tip ID 30 um
1-GT50S-6: 6 pcs glass micropipettes, S shape, tip ID 50 um
1-GT75S-5: 6 pcs glass micropipettes, S shape, tip ID 75 um
L shape for microdevices or micro liquid applying/spotting
![](http://nepagene.jp/wp-content/uploads/mpp-glass_micropipette_l-shape-e.jpg)
1-GS15L-10: 10 pcs glass micropipettes, L shape, tip ID 15 um
1-GT30L-10: 10 pcs glass micropipettes, L shape, tip ID 30 um
1-GT50L-10: 10 pcs glass micropipettes, L shape, tip ID 50 um
1-GT75L-10: 10 pcs glass micropipettes, L shape, tip ID 75 um
Silicone Tubing
![](http://nepagene.jp/wp-content/uploads/mpp-silicone_tubing03-e.jpg)
1-ST-D: Silicone tubing 1.5m ID/OD:0.8/4.0mm
This is for the connection between the PicoPipet pipette part and a glass micropipette.
The tubing needs to be cut into a 1.5-cm piece before use.
PCR 8-tube strip holder
![](http://nepagene.jp/wp-content/uploads/mpp-pcr_tube_holder-e.jpg)
1-PCR8T-1: PCR 8-tube strip holder
This holder can accommodates a PCR 8-tube strip and a microscope slide/35-mm dish, and is used with the Compass video microscope.
A single cell that is picked up by the PicoPipet can be discharged into a PCR tube checking the cell visually in the PCR tube.
PCR 8-cap strip holder
![](http://nepagene.jp/wp-content/uploads/mpp-pcr_cap_holder-e.jpg)
1-PCR8-4: PCR 8-cap strip holder
This holder can accommodates a PCR 8-cap strip and a microscope slide/35-mm dish, and is used with an inverted microscope.
A single cell that is picked up by the PicoPipet can be discharged into a PCR cap checking the cell visually in the PCR cap.
RELATED PRODUCTS
Note: The specifications and appearance of products on this page are subject to change without notice.