Sonitron GTS is the device which can introduce gene or medicine into cells by means of cavitation generated by ultrasound and there is little damage to the cells. This technique is called "Sonoporation". Because ultrasound is used in clinical use, the sonoporation method is suitable for research that would be developed for clinical use. |
The transducer module is interchangeable without a calibration work, because the Sonitron GTS can self-calibrate our transducers. |
With the FUS transducer module, the Sonitron GTS can be used for FUS research. |
The Sonitron GTS makes it possible to achieve higher transfection efficiency in combination with microbubbles. Besides, it can target specific cells with the use of special microbubbles such as Targesphere SA (Targeson Inc.). |
A variety of transducer sizes are available. The transducer modules can be easily swapped. |
![]() ![]() |
Photos: Plane Wave Transducer Module, 12mm diameter tip, and Basestation |
Plane Wave Transducers |
![]() ![]() |
ST-TM1-6: Plane Wave Transducer Module, 6mm diameter tip, 1MHz ST-TM1-12: Plane Wave Transducer Module, 12mm diameter tip, 1MHz ST-TM1-20: Plane Wave Transducer Module, 20mm diameter tip, 1MHz |
FUS Transducers |
![]() ![]() |
ST-FM2-20-20: FUS Transducer Module, 2MHz, 20mm focal depth, 20mm inside diameter ST-FM3.5-20-20: FUS Transducer Module, 3.5MHz, 20mm focal depth, 20mm inside diameter |
Frequency | Plane Wave Transducers: 1MHz FUS Transducers: 2MHz, 3.5MHz |
Ultrasound Intensity | Plane Wave Transducers: 0.01-0.5W/cm2 or 0.1-5W/cm2 FUS Transducers: 10-200W/cm2 or 100-2000W/cm2 |
Duty Cycle | On: 1-9999 msec / Off: 0-9999 msec |
Treatment time | 1 sec - 20 min |
Preset | 18 preset conditions |
Power source | Setting 1 (default): 100V/50Hz, 110V/60Hz, Setting 2: 230V/50Hz |
Dimensions, Weight | 310W x 230D x 140H mm, 5kg |
All features and specifications subject to change without notice.